Outer Limits 4x4 Board

The die you see in the pictures was made by hand..

And the point is?

suzukiboy wrote:And the point is?

that he posts up many threads about very cool hand made stuff. like making a TJ replica body for a Jeep entirely from etc etc. have a search for his name here and on Pirate and see some of the very cool stuff getting made in pakistan

For once I agree with Grimbo anytime I see a new thread from this guy, I know it will be interesting.
Peter.

clever boy

Is that at the Tata factory

-Mick- wrote:clever boy

Hell Yer !!

Why do I think of "that" Peugeot ad.....

Is he making ashtrays?

FFS have some respect. What have you guys made recently ?!? The skills these guys have are amazing and we are lucky to have the pics posted here.

Thanks for taking the time to post ehsan !!

Surfection wrote: What have you guys made recently ?!?

Two babies in one go (well I helped)

DAMKIA wrote:Why do I think of "that" Peugeot ad.....

Ahh yes, good call Gary, these guys would that in their sleep.
Anyone have a link to the ad.
Peter.

something out of nothing. I like it. Turned out very smooth and like it was made with a million dollar press. Have u made any other dies?? would be intrested to see them

Surfection wrote:FFS have some respect. What have you guys made recently ?!? The skills these guys have are amazing and we are lucky to have the pics posted here.

Thanks for taking the time to post ehsan !!

I have absolute respect for his fabbing ability. I have seen his work both here and on Pirate. No disrespect meant to Ehsan.

Still doesn't change my attitude to that advertisement, as we once had an old Austin A40 (base of the Indian derived vehicle in the ad). In all honesty that thing would have moved/holed the brick walls rather than dent.

(anything's funny after being awake for ~30hrs...)

Here are sme more pics

The complete headlight ring.. The die makes only the inner half..

Damn nice work..... that's something you don't see everyday

you should make some of these. i sold one recently for $150. its just a bit of pressed stainless 40mm in diameter.

http://cgi.ebay.com.au/monaro-hk-ht-hg- ... dZViewItem

[quote="andrew e"]you should make some of these. i sold one recently for $150. its just a bit of pressed stainless 40mm in diameter.

http://cgi.ebay.com.au/monaro-hk-ht-hg-boot
Would need a couple in hand to make the die.. What is it used for exactly.
Ehsan

ehsankiani wrote:

andrew e wrote: you should make some of these. i sold one recently for $150. its just a bit of pressed stainless 40mm in diameter.

http://cgi.ebay.com.au/monaro-hk-ht-hg-boot
Would need a couple in hand to make the die.. What is it used for exactly.

Ehsan

It surrounds the lock barrel on the boot/trunk. Great work as always.

You can see one if you look closely at this pic.

ISUZUROVER wrote:

ehsankiani wrote:

andrew e wrote: you should make some of these. i sold one recently for $150. its just a bit of pressed stainless 40mm in diameter.

http://cgi.ebay.com.au/monaro-hk-ht-hg-boot
Would need a couple in hand to make the die.. What is it used for exactly.

Ehsan

It surrounds the lock barrel on the boot/trunk. Great work as always.

You can see one if you look closely at this pic.

That would be easy to make and cheap too depending on the number of pieces required.
Ehsan

no thats a ht monaro, they were only on the hk. There were a total of mabe 5000 HK gts made in 1968/1969. So mabe 20 or 30 would cover the shortage. I have one of these left at home, so i will try and machine one up out of billet at work and send it over. I'll keep you posted.

andrew e wrote:they were only on the hk.

Not according to the ebay link you posted.

doesnt matter what the seller advertised it for, they only came out on the hk gts with the full length alloy boot strip. the ht/hg had the same boot/lock as the ht/hg sedan.

Andrew.

Welding the inner to the outer ring..