Advice on re-assembling Ring Style Airspring (w/ pic)
Posted: Sun Feb 26, 2006 6:42 pm
While mucking around with fancy lifts and long travel springs, I popped one apart. Not standard rubber rim type - this is an Arnotts aftermarket airspring from USA.
Arnotts may be able to offer some help and the product may be covered under warranty but Florida is a long way away...
The trick is to refit big ring back around the top of airbag which is secured by the ridges of the top cap. It's a really tight fit and I do beleive there is a more sophisticated method than just wacking it with a hammer. Just looking for some advice from anyone who may have experienced this problem before.
Thanks,
Hardy
Arnotts may be able to offer some help and the product may be covered under warranty but Florida is a long way away...
The trick is to refit big ring back around the top of airbag which is secured by the ridges of the top cap. It's a really tight fit and I do beleive there is a more sophisticated method than just wacking it with a hammer. Just looking for some advice from anyone who may have experienced this problem before.
Thanks,
Hardy