Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Battery light won't go out!

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Battery light won't go out!

Post by big bundy »

On the way to work this morning the battery light went on, pulled over check everything, all connectins good. as i had been playing in the mud on sunday i thought i had farked it, so got a reco alt from bursons, for $110, sweet!

go home fit it, start her up, light is still on, hmmmm check connections and put some delectic greese in the plug at the back of the alt, sweet its now charging close to 14 volts at idle, turn everything on and drops to around 13, and when car is off drops to 12.74.

but still the light won;t go out, have i missed anything? i have tripple check all connections.

:cry:
bundy's suck ass
LWB patrol's are where its at!
Top
Posts: 918
Joined: Fri Jul 22, 2005 12:49 pm
Location: canberra

Post by 460cixy »

toyota external regulator is rooted open it up and clean the mud out
range rover & series one landy!
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

got a location mate? its on a bundera!
bundy's suck ass
LWB patrol's are where its at!
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Under the bonnet. :lol:

I reckon it'll be a rectangular tin thing bolted to the body, somewhere not far from the alternator. Probably have two wires/one plug. Pull it apart to clean it. If it has an internal fuse, have a good look at it. Be careful not to bend anything while you're cleaning it. Seal it up with insulation tape when you put it back together.

Of course, the flash ones are solid state - can't pull it apart.

Good luck,

Scott
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

Shot down to the auto elec this morning. Turned out to be a coil burnt out on the volatage regulater, he recons the old alt's diode shit itself causeing this to burn out.

waiting for a new regulater to come in right now :armsup:
bundy's suck ass
LWB patrol's are where its at!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests