Hi all,
Has anyone on here converted there drums to disk on a 96 model rodeo. Any info would be great.
Cheers
Ben
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
disk brake conversion on a 96 rodeo
Moderator: Moderators
Get a jackaroo rear diff of the 91 variety, they are the same as the MU 89 to 93' with disc hand brake. Centres are the same as long as the have the 2.8td engine (or you will have to swap centres as the diff housing is the same)...
Go hard or go home!!!
MU build here
MU build here
Yeah not sure about that but I would think they would be interchangable if they were the same width which I think they are.
I was just thinking about it again and you would be better off if you can find a 94 model on MU with the 3.1 or 3.1/v6 Jack as these have a handbrake as a drum inside the disc and would be easier with handbrake cables.
I was just thinking about it again and you would be better off if you can find a 94 model on MU with the 3.1 or 3.1/v6 Jack as these have a handbrake as a drum inside the disc and would be easier with handbrake cables.
Go hard or go home!!!
MU build here
MU build here
Who is online
Users browsing this forum: No registered users and 0 guests