Page 1 of 1
transfer case mounts
Posted: Wed Aug 27, 2003 7:46 pm
by dtzook
just wanted to know what you guys do with your rubber transfer case mounts, do you use bigger and stonger ones off a different vehicle or just carry spare stock ones?
cheers Daniel
Posted: Wed Aug 27, 2003 7:58 pm
by moose
remove the studs from either end of the stock mount !!!
drill a hole right through & use a long bolt , with a Nyloc nut !!!!
use a Nyloc , so you can tighten it , but not over tight , & it "shouldnt" come loose !!
Posted: Thu Aug 28, 2003 1:32 pm
by OVERKILL ENG
We now stock these if anyone is interested.
SAM
Posted: Thu Aug 28, 2003 1:40 pm
by N*A*M
kong bucket? how much? immediate availability?
what other new stuff have you got?
Posted: Thu Aug 28, 2003 1:59 pm
by greg
Hey Sam,
will it clear the handbrake setup of the 1L cases with the handbrake drum on the back of the x-fer case?
Do you make a disc brake replacement for the 1L drum handbrake?
thanks mate,
Greg
Posted: Thu Aug 28, 2003 9:19 pm
by OVERKILL ENG
NAM GREG
The one litre handbrake will still fit.
We are still waiting for the flares to arrive but we have extended shackles there bullet proof gearbox mounts and the MIGHTY KONG.
I will start a post and put photo's of each up.
SAM