Outer Limits 4x4 Board

Hey All,

About to turbo the td42 and lookin for a hi-flow airbox option, anyone done any custom work?

MTQ sell their airbox for $250 bucks, I can make one a lot cheaper than that just need to design it,

Any pics would be great,
Cheers

J P C JOHNSON PERFORMANCE CENTRE PTY LTD
27 Lipton Drv Thomastown 3074 (03) 9469 2566

Does heaps of nissan stuff. The man to talk to

Dave.

there probably the next option, just looking everywhere before i decide,

Thanks Troy

there probably the next option, just looking everywhere before i decide,

Thanks Troy

there is a plastic donaldson type dont know part numbers but they seem ok they have 4" inlet and out and can be adjusted to suit the direction of the pipe work...

i think they under $200 ish.... seem to be quite popular if i dont make mine up with a simple pod i might just buy one of these.

SS commie air box flow some very high numbers and fit anywhere

thanks guys, I had thought about the commie idea, think it might be the one,

I've looked thru the donaldson stuff and couldnt find anything easily tampered with to work well,

Cheers Troy

thanks guys, I had thought about the commie idea, think it might be the one,

I've looked thru the donaldson stuff and couldnt find anything easily tampered with to work well,

Cheers Troy

good choice as there cheap, cheap and replacment filters are $8 plus they flow ALOT of power ie back to back dyno runs on my cressida (1JZ twin turbo) first without anything then with the ss unit and had next to no loss