Hi I'm ,I just wondering if anyone has fitted a nissan factory alloy bullbar to 2002 patrol .It has drivers side airbag & the bullbar is airbag compatible.
I just need to know what the procedure is for fittment as I dont want the airbag to go off or be dissabled/damaged etc.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GU Bullbars
I cant be sure with the GU patrols but most sencers on cars i've pulled apart are either under the dash or on the firewall somewhere. you would have to find the sencers than wack it pretty hard with a hammer to set one off. 
In the 10 years i've been working in a panel shop i've never seen anyone set one off pulling a car apart or putting one together.
Cheers Mick.
In the 10 years i've been working in a panel shop i've never seen anyone set one off pulling a car apart or putting one together.
Cheers Mick.
Who is online
Users browsing this forum: No registered users and 0 guests