Page 1 of 1

Diff specs

Posted: Mon Mar 06, 2006 2:18 pm
by mickyd555
Does anyone know if a H233 coil diff from a GQ is wider than a H260 leaf diff from a GU. Or do you know where i can get these specs, nissan are not being much help :roll:

Posted: Mon Mar 06, 2006 4:24 pm
by Big Red Toy
nissan car yard & a tape measure :D

Re: Diff specs

Posted: Mon Mar 06, 2006 6:12 pm
by turps
mickyd555 wrote:Does anyone know if a H233 coil diff from a GQ is wider than a H260 leaf diff from a GU. Or do you know where i can get these specs, nissan are not being much help :roll:
Pretty sure there is a thread around in here with the specs.
Found some.
http://www.outerlimits4x4.com/PHP_Modul ... cs&start=0

Posted: Mon Mar 06, 2006 7:43 pm
by mickyd555
thanks turps.

i read through it and this is where i got stuck...
Y61,
Patrol GU
Front
1998 on H233B 32.0 (1.26") 31

Rear
1998 on H233B 'small' 33.3 (1.31") 33
1998 on H260 'large' 38.4 (1.51") 37

Y60,
Patrol GQ
Front
1988-98 H233B 32.0 (1.26") 31

Rear
1988-98 H233B, rear disc brakes 33.3 (1.31") 33
1988-98 H233B, rear drum brakes 33.3 (1.31") 33
1988-98 H260, leaf sprung cab chassis & utility 38.4 (1.51") 37
what is the first measurement. im assuming the (in brackets) is the axle size and the last is spline count.

Posted: Tue Mar 07, 2006 6:38 am
by Nikolay
mickyd555 wrote: what is the first measurement. im assuming the (in brackets) is the axle size and the last is spline count.
The first measurment is a diameter of a spline joint in millimeters.

Posted: Tue Mar 07, 2006 12:18 pm
by mickyd555
Nikolay wrote:
mickyd555 wrote: what is the first measurement. im assuming the (in brackets) is the axle size and the last is spline count.
The first measurment is a diameter of a spline joint in millimeters.
Thanks mate, do you know what the width of diff is, or more to the point. im after the difference in width between a GQ H233coil and a GU H260leaf.