Sump
Posted: Sat Aug 30, 2003 4:56 pm
My 21R-C has the sump bowl at the front, can i just bolt on a 18R rear bowl sump?
Page 1 of 1
Posted: Sun Aug 31, 2003 12:13 pm
depends on the pick up.
Posted: Mon Sep 01, 2003 7:17 am
bubs you may need to re-route the pickup there was a topic on pirate about this only days ago, as long as the pickup is in the deeper part of the sump, you can put the bowl anywhere...... front, middle, rear!
Posted: Mon Sep 01, 2003 7:31 am
cool rob, i will drop the oil out and have a look i guess
Posted: Mon Sep 01, 2003 10:08 am
these motors came out in heaps of vehicles - vans, utes 2 & 4wd, celicas etc, local wreckers should have heaps of these motors in vehicles you could eye ball for a sump and pickup.
Posted: Mon Sep 01, 2003 10:14 am
ihave been told 21r and 18r are almost the same motor, besides 21 has an alloy head a few other slight changes, i have a 18R out of a 4wd and want to use its sump and pickup on the 21r
Posted: Mon Sep 01, 2003 10:34 am
The 18R is different. One of the 21R engine mount brackets are also different. It just so happens i know a guy that has a 4wd sump/pickup and engine mount bracket 
Posted: Mon Sep 01, 2003 10:35 am
I beleive he also has an electronic distributor
Posted: Mon Sep 01, 2003 10:53 am
is this guy pm able?
Posted: Mon Sep 01, 2003 10:54 am
I think so
But im about to go out so make it quick
But im about to go out so make it quick