Outer Limits 4x4 Board

Posted: **Tue Mar 14, 2006 9:52 am**

I am after the measurements of the bolt holes of the top cap. Wendle suggested that maybe the high steer arms off a 60 might fit a mq/k patrol as the bearings are the same. If it does or is close we are in business. Probly wont but we might be able to make it work.

Thanks and here is hopeing

Posted: **Tue Mar 14, 2006 6:02 pm**

Pleaze guys, Only take 2 mins to check. I drive a toyota as well so its not all that bad.

Posted: **Tue Mar 14, 2006 6:17 pm**

Length centre to centre 55mm
Width centre to centre 31mm
Hole diameter 13mm

Posted: **Tue Mar 14, 2006 6:47 pm**

The patrol is 50mm x 50mm centre to centre and 11mm holes

SO no good to me i think

Thanks for the help

Outer Limits 4x4 Board

60 series king pin cap measurements.

60 series king pin cap measurements.