Page 1 of 1
What ratio came standard
Posted: Wed Mar 15, 2006 7:52 am
by slingabrad
The 1988 lwb maverick im wrecking has air lockers and im wanting to sell the centersw with lockers fitted.
What ratio would these be(i havent got them out yet)
4.2 pet 5spd man
Cheers
Brad
...
Posted: Wed Mar 15, 2006 7:56 am
by JemmyBubbles
Mate.
Open your bonnet and have scout around on the firewall - passengers side if I remember correctly. There will be a plate with chassiss number and engine number etc.. Somewhere on it will be HG41 or HG39 - this will indicate the ratio that your truck has from factory.. ie, 4.1 or 3.9.
I will bet $50 you have 4.1's : )
Posted: Wed Mar 15, 2006 8:54 am
by slingabrad
thanks mate
Posted: Wed Mar 15, 2006 10:34 am
by Tailspin
should have the ratio stamped on the crown wheel mate
Posted: Wed Mar 15, 2006 10:45 am
by RoldIT
Tailspin wrote:should have the ratio stamped on the crown wheel mate
Unfortunately, the diff housing isn't see-through ...
Posted: Wed Mar 15, 2006 11:58 am
by MQ080
RoldIT wrote:Tailspin wrote:should have the ratio stamped on the crown wheel mate
Unfortunately, the diff housing isn't see-through ...
Posted: Wed Mar 15, 2006 7:29 pm
by CB0569
Mine has 3.9's Good on road with 31's but s#$t with 33's on road worse up hills.