Outer Limits 4x4 Board

I have just recieved a bypass filter from the USA to fit to my diesel 4x4, it uses toilet paper, the Aussie TP standard seems to be 11cm tall although the bypass filter uses rolls around 12cm tall as in the US.

If anyone has been through this before, and found suppliers or brands in this country to suit? I would love to hear from you.
The filter is a motorguard.

cheers fnq

Better put your flame suit on ...

2ply or 3ply

sorry couldn't help myself.

Ian.

Uh-Oh! Carefull Im starting to get shity!!

http://www.bypassfilter.com/photos.htm

u may want ot buy the proper filter.

fnqcairns wrote:Uh-Oh! Carefull Im starting to get shity!!

Well your coverd then.

Make up a spacer from 10mm aluminium plate.

Yep that's it the m-30, aussie tp is a little short.



"Make up a spacer from 10mm aluminium plate".


Thanks, probably possible and a good idea, if all else fails I will try something like that.

cheers fnq[/quote]

Try norther truck spares or detriot.

Ian.

Ian what for? the toiletpaper?

Will ring now to see.

cheers fnq

Yes They accually call it toilet paper filters.
ASK for Brad.
We use them on odd sh*t.

Ian.

Ian they do sell one to suit a frantz filter 15cm by 15cm, so too big but certainly an option as I can cut it down in height and unwrap some of the width but at $10 each it goes a little against my original reason for fitting one. With luck there is some group of homsick americans with thier own supplyer .
I like the US idea of what size a bog roll should be anyway! BURP!

cheers fnq

We use to use them at Ozie Post, we just use a roll of paper hand towels. Just cut off the end at the right length.

I could crap on for hours with this Sh!t topic