Page 1 of 1
96' engine in 87' samurai
Posted: Wed Mar 22, 2006 2:01 am
by buger
Will a 96' injected engine fit in a 87' Samurai with carb?
Are there needed some modifications to the engine mounts, will the new engine bolt on the old tranny?
What parts of the 96' Samurai will I need to make it run (electronic)?
Thanks!
Posted: Wed Mar 22, 2006 7:36 am
by Nev
your 96 mods were injected? thats cool! whats the engine model coz ours were still carby. Could be the engine like in our jimny which is a G13BB before it went twin cam i think....correct if wrong guys.
Posted: Wed Mar 22, 2006 8:27 am
by Spike_Sierra
g13bb isnt twin cam, but is 16v, got one in the shed, putting in today
Re: 96' engine in 87' samurai
Posted: Wed Mar 22, 2006 11:41 am
by Gutless
buger wrote:Will a 96' injected engine fit in a 87' Samurai with carb?
Are there needed some modifications to the engine mounts, will the new engine bolt on the old tranny?
What parts of the 96' Samurai will I need to make it run (electronic)?
Thanks!
You will need all of the sensors, wiring looms, fuse boxes, ECU and ECU harness, and all ancillaries that are attatche dto the motor ( altenator, starter, etc....and prolly the flywheel and clutch too)
If the EFI motor is still a G13 varient, it will bolt up to your gearbox.