Have searched this site but can't find info on lifting the rear 2" on an '03 rodeo. So i gather that you wind the torsion bars up to capacity. (do you guys chop the bump stops on the upper control arm?). But how do you go about lifting the rear? Whats the average price of a set of 2" rear springs or are there springs from another vehicle that can be fitted to give you the height?
Any help would be awesome guys!! Its for a mates Rodeo!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Lifting a rodeo?
Moderator: Moderators
Have a look in the FAQ section at the top of the list. A good selection of info in there.
The search function here is not good!!!!
The search function here is not good!!!!
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
Who is online
Users browsing this forum: No registered users and 1 guest