Outer Limits 4x4 Board

pulled the rear axles out of my zook today(luxy diffs) to have a look at the centre and the drivers side spline is 1/3 worn away, so I thought Id get one of my spares out but its the same is this normal for lux rear axles?

Not on mine. Just pulled them out to change the centre and they look fine. Looks like ya got a problem But your not the only one!!!!

Rhett wrote:pulled the rear axles out of my zook today(luxy diffs) to have a look at the centre and the drivers side spline is 1/3 worn away, so I thought Id get one of my spares out but its the same is this normal for lux rear axles?

jeffo has a couple off spares rears ,can find out for u . i think there bare no bearins or brakes

Rhett wrote:pulled the rear axles out of my zook today(luxy diffs) to have a look at the centre and the drivers side spline is 1/3 worn away, so I thought Id get one of my spares out but its the same is this normal for lux rear axles?

Most likly a bent or out of line housing as the axles turns its moving in the side gear and wears the spline but the splines do wear and once wears starts it keeps wearing on a encreasing scale until failure.

Wally

Thats what I was thinking, I just couldn't work out why my spare was worn too as it came out of a different housing. I know mine is a little bent