Outer Limits 4x4 Board

have heard a few people ask different ways of gettin flex from a mq and whilst this has probably been discussed before the best way / only way i can really see is with softer springs and shackles

for example my mq was 2in spring lifted however on closer inspection with a mate we found out i only get about 1-2 inch of flex.... so wat to do

REMOVE LOAD LEAVES

and this is wat we got from her cruiser canyon

Heath

we touched on it here and took it a bit futher then the initial question if you want that little extra

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=66839

i was going to link over to this very thread

thanks guys having a read of it now