Page 1 of 1
What is 60s PS worth???
Posted: Tue Mar 28, 2006 5:22 pm
by hokey
As the title sugests what would you guys pay for a used 60s power steering setup. with everything included. also what would you pay for a pair of 60s diffs aswell?
Cheers, Calvin
Posted: Tue Mar 28, 2006 6:16 pm
by fatmanjt
Just recently a mate picked up a pair of 60 diffs for $450. wrecker we know sells them for $750 a pair. So pays to do a thorough search. 60 series power steer used to bring real big money but we just paid $250 for complete set-up. Look for private wreckers best bet.
Posted: Tue Mar 28, 2006 6:21 pm
by hokey
My mates dad has a cruiser with rusted body but good drivtrain and 350 chev. considering buying whole car so my brother can have the 350 for his 40/HK and i can have the diffs and PS. not sure what the parts were worth thats all.
Cheers
Posted: Tue Mar 28, 2006 8:13 pm
by WICKED
were are you mate?????
Posted: Wed Mar 29, 2006 6:46 am
by hokey
eastern suburbs of melbourne
60 bits
Posted: Wed Mar 29, 2006 10:02 am
by slingabrad
Im selling 60series diffs for...
FRONT $375 complete
REAR $300 complete
PWR STEER $350 complete
Hope this helps
Brad
60 bits
Posted: Wed Mar 29, 2006 10:03 am
by slingabrad
Im selling 60series diffs for...
FRONT $375 complete
REAR $300 complete
PWR STEER $350 complete
Hope this helps
Brad
Posted: Wed Mar 29, 2006 1:31 pm
by hokey
cool thanks for the info
Posted: Wed Mar 29, 2006 8:04 pm
by vSAHARAx
my power steering box is leaking, are you able to put a new seal kit in them or what? november last year the original box started leaking, so i went to the wreckers got another box now 4 months or so later this one is leaking, whats it cost to get a seal kit (if possible)???
Troy
Posted: Thu Mar 30, 2006 8:28 am
by WICKED
hokey wrote:eastern suburbs of melbourne
i'm chasin diff but melbourne might be a little far.. depending on $$$$$$
??????
Posted: Fri Mar 31, 2006 6:14 am
by sambo
Putting a seal kit through the box is not hard to do. you should be able to get a seal kit for about $160 (from memory). when you put it in just be real careful not to kill one of the white teflon high pressure seals. Then i recomend getting it adjusted by a Power steering place.
Sammy