Page 1 of 1
oil pressure on 4BD1T? in psi
Posted: Thu Mar 30, 2006 1:46 pm
by def90
just wondering if anyone knows what pressure a 4BD1 Turbo (if thats makes much difference) should run in PSI?
mine runs 60psi then can drop down to 45 if going slow and off the gas.
i was told they should be up around 100 PSI!
is this correct?
unless i have a faulty gauge?
Posted: Thu Mar 30, 2006 5:04 pm
by Maggot4x4
Mine drops as low as 20 when at idle, about 80 when driving.
oil
Posted: Thu Mar 30, 2006 5:13 pm
by def90
cheers maggot, as i am far from mechanically minded, do you think 60psi is 'below normal'? 20 psi seems a fair difference...
Posted: Thu Mar 30, 2006 5:40 pm
by Maggot4x4
I would of thought 60-80 was about the norm. You don't have as much variance as me, but I run my idle fairly low.
Try asking here they may know more
http://clubisuzu.proboards29.com/index.cgi
or here
http://www.4x4wire.com/forums/postlist. ... oard=UBB74
psi
Posted: Thu Mar 30, 2006 6:12 pm
by def90
will do cheers maggot
Posted: Sat Apr 01, 2006 8:39 pm
by isuzu110
For what it's worth, my Isuzu 4BE1 NA runs 70 PSI on the highway