Outer Limits 4x4 Board

Posted: **Sat Apr 01, 2006 6:17 pm**

They seem to be 1/2 BSF almost.

Anyone know for sure, I need to rethread one

Posted: **Sat Apr 01, 2006 6:20 pm**

I thought most wheel studs were M12, either 1.0 or 1.25. But I found my rear seatbelt mounts were UNF, so I won't be surprised if your Paj is imperial.

Good luck,

Scott

Posted: **Sat Apr 01, 2006 7:18 pm**

i think they are m12 fine thread, but cant remember what pitch. probably 1.25.
cookie monster

Posted: **Sun Apr 02, 2006 5:49 pm**

I'm sure they are M12 x 1.25. Just a common tap size I've got laying around here somewhere.
Peter H

Posted: **Sun Apr 02, 2006 9:36 pm**

Pajero are M12x1.5 pitch the same as most other jap 4x4, the exception is nissan with M12x1.25
Almost all seatbelts are 7/16 unf, the few exceptions are american cars and some holdens with M12x1.75 in the later ones and 1/2unf in the earlier ones, and HQ 's ?
J Top

Posted: **Mon Apr 03, 2006 6:49 am**

Ok thanks guys,

look like 12mm get the node, cheers

Posted: **Fri Apr 14, 2006 4:52 pm**

same as commodore

Outer Limits 4x4 Board

Any one know what size & thread is the wheel nuts??

Any one know what size & thread is the wheel nuts??

wheel stud threads