Outer Limits 4x4 Board

Hi Fellas.
Just wondering what the tappet adjustments should be for a 1984 sj40 Big block 1 Ltr...

and where abouts the engine number is on as above..

thanx

cheers

According to haynes;
8 valve intake 0.13 to 0.17mm, exhaust 0.16 to 0.20mm.
16 valve intake and exhaust 0.08 to 0.12.
Dont think we got the 16v in australia though.

engine number on the f10a is on the drivers side right down at the base of the block, below the starter motor.

guys thanx alot. found engine number just after i posted and thanx for the tappet info..

thanx again fellas



Cheers