Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
How do I get the clutch off the flywheel...?? The gearbox came off after a few dozen tins and a lot of , as we've never done it before, but getting the clutch pack off, is it a matter of undoing the bolts around the outside, and then knocking the centre? Someone mentioned something about that, but I didn't understand it. Its late and it all seemed a little troubling so if someone could let me know where to start, would be great.
the clutch is clamped between the pressure plate and the flywheel. There will be a ring of bolts holding the pressure plate to the flywheel. Undo them slowly and evenly, and the pressure plate and clutch will both come off.
, as we've never done it before, but getting the clutch pack off, is it a matter of undoing the bolts around the outside, and then knocking the centre? Someone mentioned something about that, but I didn't understand it. Its late and it all seemed a little troubling so if someone could let me know where to start, would be great.