Outer Limits 4x4 Board

Iv had a day off today so i decided to play with the lift blocks that have been sitting in my shed for months . I put the rear ones in to see what it looked like and lifted the front with a jack to the same hight.The car now sits from lower part of the rim to bottom of guard 32in where it was around 29inch before .What do you all think ? should i leave it the way it is or finish the job off or go buy another nissan ?( left pic is with block in right is with block out )

i dunno mate it ll still look like a hair dressers car no matter what you do
love benny

put the blocks in if youve got them lying around, not being used. Nothing wrong with a bit more lift, as much as i hate body lifts.

yeah thanks benny
its not a body lift as it already has one its blocks that go under the springs and strut spacers

boughts some new rims need to cut a tiny bit more to get them to fit what do you think

1 more

Looks good Huggy but I think you might need more than a little cut!
Nik

looks like its time to get the grinder out you will need to cut lotss off by the look of it

time to buy a spring lift now too eh? =P

not to bad still a hair dressers car

alien wrote:time to buy a spring lift now too eh? =P

nah just cut thats the way to go

and why are you fucking about get some lux diffs or the like under it

had all the hilux gear and commo motor and gear box then had to sell b/c the other 1/2 got preggers now we have a little girl so the car is the last thing that gets money spent on it