Page 1 of 1
80 series high - low knob
Posted: Sat Sep 06, 2003 9:01 pm
by hypo
which way is high and low ?? forward and back respectively ??
i was thinking bout usin one on my dual cases but need the low forward and high back
if that makes sence
Posted: Sun Sep 07, 2003 7:28 am
by XXXL80
hey hypo,
the gears are as followed
H2 top of stick
H4
N
L4 bottom of stick
if i had a digi i would tak e a pic for ya
but hopefully that explains it!!
luke
Posted: Sun Sep 07, 2003 9:18 am
by Maggot4x4
On a GXL it is
H
N
L
Posted: Sun Sep 07, 2003 6:18 pm
by hypo
Maggot4x4 wrote:On a GXL it is
H
N
L
DOH !!!! was hoping it was
L
N
H
so i could use it on the lux o well anything else that may work nissan ?? pajero ??
Posted: Sun Sep 07, 2003 7:18 pm
by Area54
Sorry Ben, Nissan -
H2
H4
N
L4
Posted: Sun Sep 07, 2003 7:41 pm
by ozy1
Make your own knob, get an engraaver and a cheap knob, engrave what eva you want in it, and use a felt pen to add colour, then give it a clear coat.
Bobs your uncle
Posted: Sun Sep 07, 2003 8:55 pm
by WICKED
ozy1 wrote:Make your own knob, get an engraaver and a cheap knob, engrave what eva you want in it, and use a felt pen to add colour, then give it a clear coat.
Bobs your uncle
BOOTY FAB
Posted: Sun Sep 07, 2003 11:09 pm
by hypo
ozy1 wrote:Make your own knob, get an engraaver and a cheap knob, engrave what eva you want in it, and use a felt pen to add colour, then give it a clear coat.
Bobs your uncle
thats the plan
Posted: Mon Sep 08, 2003 8:35 am
by Maggot4x4
Rangies go
L
N
H
Pre 85 Anyway
Posted: Mon Sep 08, 2003 1:55 pm
by bj on roids
put the 80 one on upside down
_
|
N
H
SWEET
Posted: Tue Sep 09, 2003 11:01 am
by Punchy
you stole my thunder there BJ..i was gonna suggest the same thing