Outer Limits 4x4 Board

Can anyone help to tell me what exactly this part calls?
Bell House of the front diff?

Do I need to replace the whole diff?
Or just the housing and may be the gear...

I don't know how to check the inside of it as I'm as good as you guys.

Umm, it happened yesterday......

You have cracked to front diff centre carrier. Gonna need a new one sorry to say.
Layto....

You may get away with just a new housing if you haven't damaged the ring & pinion. How did you do it? Too much right foot in reverse is a common cause. If you can find a steel housing from a manual V6 Grand Vitara (or a late '03 and on Auto V6 but make sure it is steel and not alloy) you shouldn't have any more problems again. You can also use a housing from the XL-7 but the crossmember mount is different so you would need to do a little fabricating to make it work.

Thx guys.
Hope I only need to steel housing and didn't damage the other parts...

Anywhere I can get the steel housing from?

Well, I was struggling to climb up from the bottom of a little vally.
The right front wheel was lifted in the air.
Since I don't have the air lock...
The wheel was spinning in the air then hit the ground.
So it stopped suddenly.
That's how it caused the problem I think...
I didn't know what exactly went wrong...

Ippie wrote: Since I don't have the air lock...
The wheel was spinning in the air then hit the ground.
So it stopped suddenly.
That's how it caused the problem I think...
I didn't know what exactly went wrong...

That'll do it.

Try a Wrecker. Failing that Suzuki spare parts can get them.

Umm, I don't have many wreakers in my area....
I'm thinking to get one from other places.
That's why I need to know what this part calls and any other models would fit to my 96 vit.....

I got a couple of these in the garage minus ring and pinion if you are interested let me know......They are alloy not metal by the way but there are cheap....

Thx!
Please check your e-mail!
I might need it from you!