Page 1 of 1
2" lift blocks for a 92 NJ LWB.
Posted: Tue Apr 11, 2006 2:21 pm
by shanej
Hi
Just wondering if anyone knows where I can get some 2" lift blocks for my wifes NJ
blocks
Posted: Tue Apr 11, 2006 5:17 pm
by klrevo
hey shane,
theyre just body blocks the same as you would use for most forubies other than zooks that use sqaure i think, somewhere around 65mm round x 50mm long, or how ever high you want to lift it. cheapest would be to pick up some scrap ali bar from somehwere, i got mine for free
its sitting in the garage... otherwise the poly stuff will do if you can get it engineered, iv even heard poeple use stuff like boat trailer rollers
im sure you can get them from somehwere as a kit but theyd cost a motza, just get high tensile bolts to match, 2" longer obviously, and thatll get you going in the right direction
dean
Posted: Tue Apr 11, 2006 5:33 pm
by shanej
Hi
Yeah i did the 2" lift on my MQ SWB which I brought the poly blocks off Ebay and got the blots from a place in Mackay. I was wondering if the diameter of the blocks are different or all they all universal. If they are all the same I will chase some up.
Without looking under the car, how many are needed?
blockx
Posted: Wed Apr 12, 2006 7:24 pm
by klrevo
yeh shane, the diamater im pretty sure that works is somewhere aorund the 60mm-65mm, and for how many you need is it shorty or LWB>>> i think perhaps 8 for SWB and 10/12 for LWB, mines shorty someone else may be abkle to clear up for the LWB, and its also on here somewhere if you search youll find it
dean
Posted: Wed Apr 12, 2006 7:41 pm
by -Scott-
Shane, NJ was released in Oz late '93.
Is yours '92 Oz model (NH), or NJ, or grey import "NJ equivalent" made in '92?
Doesn't really matter for the body lift, but it could help with future issues if you work this out.
Cheers,
Scott
Posted: Tue Apr 18, 2006 1:21 pm
by shanej
hI
It is a 92 NJ. Just want to play around with the lift as it is the wifes car.