Passenger side tcase mount ripped today. It slammed the shifter so hard into the drivers side of the shifter hole it bent the selector tip. Could not select anything on the 4wd side after deselecting 4low.
Soft as anything, bent it back with a hammer and a block of hardwood when I got home.
Replaced the mount on the track with a bolt and a shock bush sandwiched between the tcase arm and mount.
I have now replaced all three mounts with bolts and sway bar bushes, much better.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bent Transfer case shifter tip
Bent Transfer case shifter tip
You do not have the required permissions to view the files attached to this post.
Posting quality not quantity!
Wanted: Stock HiLux Front Leaf Springs
Wanted: Stock HiLux Front Leaf Springs
This is still to do... Ill need a few days to get round to putting some mounts on the tcase ring that Roctoy got laser cut and cutting the old mount off the chasis. As you can see it wasn't an expensive or long job to fix... about 30 mins to do including stuffing around doing some lifting of plants into the garden for the missus.Zute wrote:Glad to hear you,ve got it fixed ok. Did you lift the T-box ?
Posting quality not quantity!
Wanted: Stock HiLux Front Leaf Springs
Wanted: Stock HiLux Front Leaf Springs
Who is online
Users browsing this forum: No registered users and 1 guest