Making throttle cable

Post by **cloughy** » Wed Apr 19, 2006 8:20 pm

I was wondering who makes throttle cables up in vic, or do i have to make one from an old pushy cable myself

Post by **Zeyphly** » Wed Apr 19, 2006 8:57 pm

There is a company in melbourne that is called Flexable drive agencies in melbourne that repair and make up cables for just about everthing.

Post by **6.5 rangie** » Wed Apr 19, 2006 9:05 pm

theres a guy in Greensborough that does them, can't remeber the company name, did my Rangie - 308 one for $45,. The one for my chev desiel is made from a motorbike accelerator cable, works a treat.
Damien

Post by **N*A*M** » Wed Apr 19, 2006 11:36 pm

if they are no good theres a mob in flemington as well. ill look up the details later.

Post by **N*A*M** » Wed Apr 19, 2006 11:47 pm

Company Nam is talking about is

SPEEDSCREEN

LOCATED AT:
151 MT. ALEXANDER ROAD
FLEMINGTON, VIC 3031
AUSTRALIA

PHONE: 03 9376 0714
FAX: 03 9372 1082

E-MAIL: sales@speedscreen.com.au

Post by **N*A*M** » Wed Apr 19, 2006 11:49 pm

disclaimer: black haig posted that last message. nam does not refer to himself in the third person.

Post by **cloughy** » Thu Apr 20, 2006 1:38 am

N*A*M wrote:disclaimer: black haig posted that last message. nam does not refer to himself in the third person.

Ha Ha, Thanks all

Post by **beebee** » Thu Apr 20, 2006 2:42 pm

Anybody know of a place in Brisbane to do the same?

Post by **Bartso** » Thu Apr 20, 2006 3:46 pm

beebee wrote:Anybody know of a place in Brisbane to do the same?

there is a flexable drive on boyland ave off beaudesert road at coopers plains 32742777

a mate of mine just his done for his lancia took in his old one and gave them the new measurements and it cost around the $180 mark

Post by **beebee** » Fri Apr 21, 2006 6:32 am

Bartso wrote:
beebee wrote:Anybody know of a place in Brisbane to do the same?
there is a flexable drive on boyland ave off beaudesert road at coopers plains 32742777

a mate of mine just his done for his lancia took in his old one and gave them the new measurements and it cost around the $180 mark

Did he get a new car with that too? I hope it included rego!

Post by **80lsy gq** » Fri Apr 21, 2006 6:40 am

we did one ourselves for Micks HQ Dave, we just got a bracket to mount to the pedal from California Speed Supplies and cut to suit..

i assume this is for your buggy so would be a cheaper way of doing it and you wouldnt need a bling bracket for the pedal like we used either..

dave

Post by **J Top** » Fri Apr 21, 2006 9:17 pm

You cannot use electrical solder to make cables, you need industial solder for a stronger joint, especally on motorcycle brake and clutch cables.
J Top

Post by **cloughy** » Fri Apr 21, 2006 9:51 pm

Yea if i make one it'll be silver soldered

Outer Limits 4x4 Board

Making throttle cable

Making throttle cable

Who is online