Outer Limits 4x4 Board

anyone had any experience with aftermarket engine mounts? i saw these on ebay just curious if they are a waste of money or not?


http://cgi.ebay.com.au/NISSAN-PATROL-EN ... dZViewItem

waste of time, mine lasted 5 months & i don't even drive it during the week. mine cost $29.95 each delivered, now i'm about to email him saying they are crap
From that seller aswell

Anyone in Brisbane who wants aftermarket engine mounts should speak to Syd King at QLD Rollers and Liners. His engine mounts are better than factory and much cheaper, and available in whatever rubber hardness you want. He usually makes LR mounts, but can do other stuff without problems.

ISUZUROVER wrote:Anyone in Brisbane who wants aftermarket engine mounts should speak to Syd King at QLD Rollers and Liners. His engine mounts are better than factory and much cheaper, and available in whatever rubber hardness you want. He usually makes LR mounts, but can do other stuff without problems.

You have to supply one for him to model off of?

There are a number of companies that make after market mounts, so it's a bit harsh IMO to simply class them all as good or crap.

I've got an aftermarket one in my Feroza (not sure what brand) but do remember one of the alignment dowels wasn't quite right and I had to enlarge the hole it mated with. AFAIK it's still holding in there after 12mths of daily driving.

i think i will be going geniun do it once do it right then

when i had my landcruiser i got 2 from a local wrecker/after market supplier.relaced my brocken pass side and tore it into 2 on the next trip to cruiser park.replaced it with the next one same thing happened next time i went 4 wheeling.for an extra $20 i got geniune toyota and didnt have a prob.



















4

well i emailed him & got a good reply

G'day Andrew,
post them back and i will return them to the manufacturer for a claim,
they have a standard 12 month warranty from purchase so i can either send you a replacement set or if you wish to purchase elsewhere then return them with your invoice number if possible and i will send you a full refund,
just let me know,
regards

Big Red Toy wrote:well i emailed him & got a good reply

G'day Andrew,
post them back and i will return them to the manufacturer for a claim,
they have a standard 12 month warranty from purchase so i can either send you a replacement set or if you wish to purchase elsewhere then return them with your invoice number if possible and i will send you a full refund,
just let me know,
regards

amazing really! he may get several returns from you over time though lol

InSanE wrote:i think i will be going geniun do it once do it right then

have you priced a Genuine Nissan Engine mount, i have and it wasnt a good experience,

in my TD42with DTS turbo, i have after market engine mounts, they have been in there 2 years. and still going strong, it is my daily driver, running 35 MTR's and they havnt had an easy life,

bogged wrote:

ISUZUROVER wrote:Anyone in Brisbane who wants aftermarket engine mounts should speak to Syd King at QLD Rollers and Liners. His engine mounts are better than factory and much cheaper, and available in whatever rubber hardness you want. He usually makes LR mounts, but can do other stuff without problems.

You have to supply one for him to model off of?

It depends - if he has never done one before the probably. If you have old buggered engine mounts then he can remove the rubber and reuse the metal plates - makes them even cheaper.

I have been running his mounts for years and never broken one. He also made some very complex mounts for a mate's turbo pulsar - which were better than factory apparently.

Call the number below and ask for Syd.

Queensland Rollers & Liners Pty Ltd
43 Suscatand St Rocklea QLD 4106
ph: (07) 3277 8200 Rubber Products--W'salers & Mfrs

yea i got quoted $110 each engine mount from the nissan dealer i used to work at what are people opinions on the cheezy engine mounts and price on them i heard about them 2day and they are ment to be good

Using some in the Mav,


I think the brand was Kepro or kelpro or something.

Were slightly harder to align than stock. othersie no trouble sso far in 18 months.

i used aftermarket ones (kelpro) in the in the rangie, first trip out broke both engine mounts and one g/box mount.

Drove home with radiator fan digging into the shroud and engine sitting on exhausts.

I found out later this has happened before

Mackay are probably worth a look

http://mackayrubber.com.au/pdf/enginemount_web.pdf