Page 1 of 1
Tube clamps
Posted: Fri Apr 21, 2006 12:48 pm
by brickcj7
hey guys
looking for tube clamps which are pictured below have been asking around different places but no one seems to be able to point me in the right direction have any of your seem them or know of where i might get them in australia
cheers
Posted: Fri Apr 21, 2006 12:50 pm
by GRIMACE
x2.... to suit 32nb pipe
Posted: Fri Apr 21, 2006 2:22 pm
by stu
X 3
I know you can get them from the states.
Posted: Fri Apr 21, 2006 2:28 pm
by stu
Posted: Fri Apr 21, 2006 5:15 pm
by runnin4life
are you guys after those specific ones or just a similiar
wouldnt be to hard i would thing.
would need to have access to a cold saw, taps and drills and possibly a lathe beaybe to drill some pipe out to suit exact size
cheers
elliot
Posted: Fri Apr 21, 2006 11:07 pm
by brickcj7
not after that specific product just something that does the same job and looks neat and tidy
have no idea about working with metal off any sort thats why i would like to find some one that either sells or can make them
if some one could make them locally i guess there would be a fair bit of interest so i think it could be worth while for some one who knows what they are doing
cheers
Posted: Fri Apr 21, 2006 11:55 pm
by jav
do you want steel or alloy ones?, might look at makeing some
Posted: Sat Apr 22, 2006 12:41 pm
by brickcj7
would perfer steel
tube clamps
Posted: Sat Apr 22, 2006 1:50 pm
by davejb
Ring around some of the industrial engineering suppliers.
Used to be able to get similar split clamps for large diameter drive shafts.
They are used joining long lengths of shafting on machines, the only down side will be one half will have a keyway broached in it. may be available in plain bore, worth a few phone calls
Dave