Page 1 of 2
new ute :-)
Posted: Fri Apr 21, 2006 8:55 pm
by CHOPZUKI
picked up a new daily driver last weekend
it has a 1.3 4k corolla motor and 5 speed in it, everything else is stock atm. aim is to build a good daily driver which can handle mild trips and lots of camping
look out newy crew
heres some pics;
Posted: Fri Apr 21, 2006 8:59 pm
by CHOPZUKI
oh almost forgot to add some tech
im fitting these with no lift
Posted: Fri Apr 21, 2006 9:00 pm
by lay80n
Another beach warrior, though i doubt this will town any pigs the size of the one that Nate brought back with the GQ.
Layto....
Posted: Fri Apr 21, 2006 9:12 pm
by CHOPZUKI
bahahaha ice is still cut over the size of that pig
Posted: Fri Apr 21, 2006 9:52 pm
by HotAe92
nice little buy you got yourself.
I like the look of the tray without the sides attached.
Posted: Sat Apr 22, 2006 8:38 am
by midnight
HotAe92 wrote:nice little buy you got yourself.
I like the look of the tray without the sides attached.
Me too, makes it look tougher....
Posted: Sat Apr 22, 2006 3:54 pm
by CHOPZUKI
finished fitting the 31s this morning, they bolted straight onto the rear
had to do some trimming of the front bumper and flattening out the seams on rear of wheel arch, nothing major at all,
only just rubs on the springs at full lock with 2 people in it.
heres some pics of trimming;
Posted: Sat Apr 22, 2006 3:57 pm
by CHOPZUKI
Posted: Sat Apr 22, 2006 4:06 pm
by CHOPZUKI
Posted: Sat Apr 22, 2006 4:53 pm
by tOiletduck
nice
Posted: Sat Apr 22, 2006 5:50 pm
by suzuki boy
looks awesome! Tray looks good aswell.
Posted: Sat Apr 22, 2006 7:37 pm
by lay80n
Looks good steve, but we know it will only last a few months till you start doing more to it.
Layto....
Posted: Sat Apr 22, 2006 7:41 pm
by CHOPZUKI
ive got another one to destroy first
this one will stay clean
Posted: Sat Apr 22, 2006 7:58 pm
by HotAe92
yer it looks pretty tough, jus gotta keep it clean and straight. Need to give the tray a quick respray.
I want a zook ute!
Posted: Sun Apr 23, 2006 9:30 am
by Bentzook
whats the bulge in the bonnet from ? is there a 660 turbo in there ?
Posted: Sun Apr 23, 2006 9:31 am
by antt
looking good chop, exactly what i'm chasing for a DD
Posted: Sun Apr 23, 2006 12:43 pm
by flyinwall
that looks like mine (but a different color)
Posted: Sun Apr 23, 2006 1:30 pm
by HotAe92
I was looking in the paper today for a ute, hard to find one cheap. There an 86 in there for 4 grand.
Do you mind me asking how much you paid for yours?
Posted: Mon Apr 24, 2006 11:29 pm
by flyinwall
if you are prepared to do a bit of work you might be able to pick up a cheap one like i did (thanks mud4b, he's a champ this bloke) and have a project that you can build the way you want (if you want more info on my rig check up the project gremlin thread in the members section)(sorry about the hijack)
steves new ride
Posted: Tue Apr 25, 2006 6:36 am
by toysuzi
Bentzook wrote:whats the bulge in the bonnet from ? is there a 660 turbo in there ?
its to clear the toyota 4k carby
______________________________________________________
very nice steve
well done on getting a nice clean tray back
how does the 4k push the 31 ??
whats the go with your beast sitting on stands ?? getting bead locks or changing tyres ??
cheers daryl
Posted: Tue Apr 25, 2006 1:31 pm
by CHOPZUKI
cheers daryl, the 4k pushes them ok must be because its so light
chopzuks gettin some new stuff
Posted: Tue Apr 25, 2006 2:02 pm
by lay80n
CHOPZUKI wrote:
chopzuks gettin some new stuff
Whats going on Steve.
Layto....
Posted: Tue Apr 25, 2006 2:45 pm
by ofr57
very nice
I didn't know stocko trays where that HUGE
mine came with a custom made one
how well does the 4k fit in engine bay ... pics
anyways congratulations on the find
Posted: Wed Apr 26, 2006 10:25 am
by DeWsE
Posted: Thu May 04, 2006 3:16 pm
by DeWsE
Hmmm I just got a chubby looking at this again. I think I might have to go do some spending in the near future!
PS: Whats the ramp for?
Posted: Thu May 04, 2006 3:28 pm
by alien
i reckon wider stance would be better, but yeah, awesome =)
Posted: Thu May 04, 2006 4:37 pm
by nicbeer
[quote="ofr57"]very nice
I didn't know stocko trays where that HUGE
mine came with a custom made one
quote]
Yup std tray. Mines that big also, although rust has infected it a bit on the top.
Nic
Posted: Thu May 04, 2006 11:19 pm
by CHOPZUKI
DeWsE wrote:Hmmm I just got a chubby looking at this again. I think I might have to go do some spending in the near future!
PS: Whats the ramp for?
mtb
Posted: Fri May 05, 2006 10:13 am
by DeWsE
CHOPZUKI wrote:DeWsE wrote:Hmmm I just got a chubby looking at this again. I think I might have to go do some spending in the near future!
PS: Whats the ramp for?
mtb
It would fit perfectly on the zuk tray!
So you going to get us some wheeling pic's and tell us what it is like without any lift?
Posted: Fri May 05, 2006 10:29 am
by "CANADA"
DeWsE wrote:CHOPZUKI wrote:DeWsE wrote:Hmmm I just got a chubby looking at this again. I think I might have to go do some spending in the near future!
PS: Whats the ramp for?
mtb
It would fit perfectly on the zuk tray!
So you going to get us some wheeling pic's and tell us what it is like without any lift?
i will let NAM decribe the exact meaning of this phrase....
Self Clearance
