anyone have info on modifying sd33t BOV
Posted: Sat Apr 22, 2006 5:23 am
as above,to make BOV adsjustable??or easier to go buy dump valve(but more expensive!!)
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
anyone have info on modifying sd33t BOV
Page 1 of 1
mk
Posted: Sat Apr 22, 2006 2:57 pm
Firstly its not a BOV as such its an over preasure valve. Its there in case you have problems with the waste gate and so as not to allow the turbo to over boost this valve will let go. They let preasure go at about 11lb of boost. Mine was blowing off all the time so I pulled it out and welded it shut (no more Pshhtt noises and boost drop) wahoo.
Posted: Sun Apr 23, 2006 5:36 am
yes mine blows out at 8psi!(i know what its for,and blow off valve seems the correct mane to me??pop off valve..you know what i mean)
anyway so it cant be modded then?
anyway so it cant be modded then?
Posted: Sun Apr 23, 2006 12:53 pm
mine was blowing at 6.5psi
my patrol only gets 6psi :(
GUnna weld that fucker shut and put 12psi thru it...
:D:D
my patrol only gets 6psi :(
GUnna weld that fucker shut and put 12psi thru it...
:D:DPosted: Sun Apr 23, 2006 8:30 pm
remove it completely, and put a big brass bung in there instead. Take it to your local plumbing supply store to find something with the correct thread.
Posted: Sun Apr 23, 2006 8:38 pm
yes its 1 1/4 bsp i think..