Outer Limits 4x4 Board

Hey all, i got a 307 chev in my 86 4runner and using the original 5sp.
I have the bellhousing (rodshop) but need a pressure plate.
I've rang everybody in Canberra and Repco is the onley one with a 10.5" clutch for a chev and at $580 for the pressure plate or $600 for the clutch kit.
I know marks4wd sells the kit for like $340 but i just put a new clutch plate in and only need the pressure plate. Does anybody know if the holden 10" or 10.5" will fit the chev flywheel? (The flywheel is the small tooth one 153?)
What have others used?
All help is appreciated
Mightypns

It should but if it doesn't have your friendly local machine shop redrill and tap it for you
J Top

In all the Chev V6/8 Hilux conversions I have done I use the 10" Holden pressure plate and a 10" Dyna clutch plate and the Holden ##222 thrust bearing

Adrian

hey mate i've got a 84 lux with a v6 chev and i use a holden one tonner 253 heavy duty twin plate cutch it works a treat

Thanks for the help fellas, I couldn't find an answere anywhere untill me brother said to ask on the net, and presto question answered. Thanks to those that helped it's muchly appreciated.
Mightypns