Page 1 of 1
Rock Sliders - Drawings/Dimensions
Posted: Thu Sep 11, 2003 7:09 pm
by O'Doyle
Anyone know where i could possibly get a set of rock slider drawings or measurements to suit a LWB GQ, so that i can make them myself as I have all the pipe and angle and other bits readily available. This will save me some time trying to figure it out. I would like them to be used as a high lift jacking point as well. Any info would be great.
Re: Rock Sliders - Drawings/Dimensions
Posted: Thu Sep 11, 2003 7:36 pm
by bogged
http://www.geocities.com/george_tlc/
heres some ideas from an 80, just make the measurements to suit your own.
Posted: Fri Sep 12, 2003 1:33 pm
by duncan
I just used 2 1/2 inch pipe the full lenght of the car capped the ends and used 2 1/2 inch angle 1/4 thick and ran 3 legs back to the chassis used 2 1/2 x 1/4 flat bar for the brackets which bolt to the chassis placed the bar about 6 mm away from the body ive had the full weight of the car on them heaps of times and they have never moved yet