Outer Limits 4x4 Board

does anyone make these mounts as off the shelf items or is it cut n shut the original rangey mounts?

the welds on mine look a lil dubious to say the least, and they arnt 100% square to the block either (i didnt do the original conversion) what options do i have?

Simon

I put a P76 V8 in the cruiser and just used the original brackets that bolt to the motor and adapt these to original cruiser engine mounts.
I'll send you a pic if require.
Regards Shane

You should be able to bend the original steel brackets so that the holes line up to the p76 ones.