Gday all,
Just wondering if anyone has an old bearing or knows the part number or diamensions of the input shaft bearing of a pre 83 1 liter xfer case(the one without the 4wd switch). Its getting very noisey and before i pull it apart i'd like to have a new bearing ready to go straight in.
Also where bout would be the best place to it and the seal, brizzy southside.
Cheers Dan
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bearing help
Re: Bearing help
JrZook wrote:Gday all,
Just wondering if anyone has an old bearing or knows the part number or diamensions of the input shaft bearing of a pre 83 1 liter xfer case(the one without the 4wd switch). Its getting very noisey and before i pull it apart i'd like to have a new bearing ready to go straight in.
Also where bout would be the best place to it and the seal, brizzy southside.
Cheers Dan
Input shaft bearing: 6205JRC3 (OE# 08113-62050)
Input Shaft Oil Seal (and front output): OE Only #09283-35020
Sorry mate, can't tell you where to get in Brisvegas, except that the bearing is a common size and will be obtainable from most bearing outlets (or a Suzuki dealer). The seal will have to be got from a Suzuki dealer.
Pagie
http://stores.shop.ebay.com.au/4wd-products
Who is online
Users browsing this forum: No registered users and 2 guests