Ive recently done a powersteer conversion on my HJ47 using early 60 series bits. The problem is that im pretty sure the pump is sucking air somewhere and i cant find where. The symptoms are that the fluid gets very hot very quickly the pump whines like its not getting enough fluid and eventually the resivour will have frothy fluid in it and erupt everywhere.
Ive checked all the clamps and looked for leaks and cant find anything really. I'm considering getting a seal kit from sunshine state tommorow and putting that through the pump because i think that the pump is really the only place it can be sucking air from.
Am I on the right track or am i missing something??
Cheers Paul
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Early 60 series slipper type power steer pump sucking air
Moderators: toaddog, Elmo, DUDELUX
Early 60 series slipper type power steer pump sucking air
If at first you dont succeed.......get a bigger HAMMER!!!
Who is online
Users browsing this forum: No registered users and 0 guests