Page 1 of 1
bucket swap
Posted: Fri Apr 28, 2006 12:29 pm
by bj_cruiser1
just wondering if a pair of buckets would swap out of a bundera
into a hzj75 (93) troopy without too much trouble. Even if a bit of welding is involved that is ok...what you reckon?
cheers
anton.
Posted: Fri Apr 28, 2006 3:43 pm
by Bundy_Harry
There are 3 separate patterns for front seating in the 70-75 series including the bundera's.
1 Bucket seats Driver and passenger on rails
2 Bucket seat driver and 3/4 bench passenger on rails
3 Bucket seats Driver and passenger on suspension
1 and 2 Drivers seat will swap into another 7x series cruiser with rails
however if you have suspension seats or a 3/4 bench seat on the passenger side then the mounts will be different, same is true with drivers side suspension
Bundy_harry
Posted: Fri Apr 28, 2006 3:49 pm
by Bundy_Harry
There are 3 separate patterns for front seating in the 70-75 series including the bundera's.
1 Bucket seats Driver and passenger on rails
2 Bucket seat driver and 3/4 bench passenger on rails
3 Bucket seats Driver and passenger on suspension
1 and 2 Drivers seat will swap into another 7x series cruiser with rails
however if you have suspension seats or a 3/4 bench seat on the passenger side then the mounts will be different, same is true with drivers side suspension
Bundy_harry