Page 1 of 1
injected gti head
Posted: Fri Apr 28, 2006 5:28 pm
by mlzook
was thinking of doing the conversion to an injected twin cam gti head and i'm not sure what is needed to do it (apart from a suzisport right angle drive).
Any help would be appreciated..
Posted: Fri Apr 28, 2006 8:18 pm
by cj
Pistons
Posted: Fri Apr 28, 2006 9:17 pm
by mlzook
But seriously, is there anything else to it??
Posted: Fri Apr 28, 2006 10:43 pm
by Bad JuJu
MLzook waaayy off topic but ...
Is your avatar made from the misfits logo ???
Posted: Sat Apr 29, 2006 8:26 am
by oozuk
I'm assuming that you already have a 1300 block?, if so then you will need the GTi's head bolts set, timing gears inlet and exahust manafold, change the GTi's water outlet setup as there's is at the back of the cylnder head, also there is another way to setup the dizzy without the right angle drive needed, another frend set this up on his suzuki with a combination of toyota and suzuki dizzy parts, talk to rod at one stop suzi shop at nerang about this dizzy conversion sure he could help you out.
One Stop Suzi Shop Nerang QLD
(07) 5596 3844
Posted: Sat Apr 29, 2006 10:31 am
by mlzook
oozuk thanks for that.
badjuju, yeah it is the crimson ghost!!
MISFITS