Page 1 of 1
air tank pressure
Posted: Sat Sep 13, 2003 10:56 pm
by Ruggers
does anybody know what pressure the arb compressor pressure switch, cuts in and out at, as at the moment this is only the small one i can get. till i can get an adjustable, and does anybody know if at this pressure i will be able to run an impact gun at this pressure. thanks chris
Posted: Sat Sep 13, 2003 11:09 pm
by mud4b
from memory in an old post here it was 100psi......
im sure someone in the know will correct me if im wrong
Posted: Sun Sep 14, 2003 12:28 am
by MUSS
yep thats right its 100PSI on the dot no more no less..... i think
Posted: Sun Sep 14, 2003 7:48 am
by dumbdunce
it comes ON at about 85 psi and turns OFF at about 105 psi, aboth are +/- about 5 psi, and yeah it's plenty to run most 1/2" rattle guns.
have a look at airbagit.com, they have a range of pressure switches, not sure if they will do international sales though.
Posted: Sun Sep 14, 2003 6:35 pm
by 80series chris
Hi chris i just use the standard arb presure swith on my set up and it runs a rattle gun etc with no problems, just have the revs up a bit of idle on mine around 1200 rpm seems ok but it depents on each type of engine
regards chris
Posted: Sun Sep 14, 2003 6:56 pm
by killalux
mine cuts out at around 110 psi, but that is an old gauge so it might be a bit out