Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

were can I get after market mount??

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 181
Joined: Thu Apr 14, 2005 12:09 pm
Location: Geelong VIC

were can I get after market mount??

Post by Glennb »

Im after a auto trans mount and the mount that helps hold up the front axle. Mitsu want $170 for the auto mount :x and $88 for the front axle mount.
Is there some were else I can go in melboune, prefer Geelong area to get a cheeper after maket mounts.
cheers
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Yes there is.
Kelpro make these parts and they are available through any Autobahn store.
I just luv my "clacker Jabber"
Posts: 71
Joined: Sat Jan 01, 2005 10:37 pm
Location: Melbourne Australia

Post by rhymus »

I was quoted $130.00 from repco. I'd be interested to see what autobarn says. Will ring tomorrow.
92 NH Pajero, MQ Patrol 50mm lift. One has custom rust, dents & rattles, the other has a blown engine.
Posts: 181
Joined: Thu Apr 14, 2005 12:09 pm
Location: Geelong VIC

Post by Glennb »

thanks guys, I went to Bursons a couple of weeks ago and, who Ive always found alot cheaper than repco or autobarn, didnt sell them (bugger) so I didnt bother with any other place cos bursons has always held more stock.
But Ill give repco and autoarn a ring.
Cheers
Glenn
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

I picked up the 3 front diff mounts through Repco for about $30 ea trade. They were a kelpro mount of which i got the part number from Outer's, but for the life of me can't remember the Kelpro part number! I'm pretty sure Frank came through with the Part No.

Hope this helps
Gabe
Posts: 181
Joined: Thu Apr 14, 2005 12:09 pm
Location: Geelong VIC

Post by Glennb »

Well I rang repco and outobarn and they both quoted $190+ for a auto trans mount for the Kelpro band. thats $20 more than what mitsu asking.
was quoted $110 for a maxi track brand, is this brand ok??
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests