Page 1 of 1
anyone know where i can get a cheap body and coil lift??
Posted: Mon Sep 15, 2003 9:39 am
by bundyboy
i am getting a 2" body lift and 2" coil lift for my new bundera. as all of us, i am on a strict budget
.....
in brisbane, where abouts do u guys know???
i got quoted 832 bucks for ...
king springs x 4
enforcer 35mm shocks x4
body lift blocks, no bolts.
plus home delivery.
is this decent?
Posted: Mon Sep 15, 2003 10:30 am
by robbie
dude, just get 4 2" lifted king springs, you don't need the body lift.
you can run 35" tyres on a bundy with 2" lift, but you may get some rubbing..
to fix = cut the guards, or get custom backspaced rims.
Posted: Mon Sep 15, 2003 12:41 pm
by BUNDERA
or use a hammer and or a angle grinder!!
Posted: Mon Sep 15, 2003 1:07 pm
by N*A*M
well done seriesboy! you got yourself a cruiser now eh?
Re: anyone know where i can get a cheap body and coil lift??
Posted: Mon Sep 15, 2003 6:04 pm
by Beastmavster
bundyboy wrote:i am getting a 2" body lift and 2" coil lift for my new bundera. as all of us, i am on a strict budget
.....
in brisbane, where abouts do u guys know???
i got quoted 832 bucks for ...
king springs x 4
enforcer 35mm shocks x4
body lift blocks, no bolts.
plus home delivery.
is this decent?
Go to a bolt store and a alloy place and get some bodylift blocks on the cheap..... It should be pretty easy.
I got the 2" Kings springs for my Vitara and although it's good for clearance and cheap I regretted it in the long run - they were too hard. This may not be the case with yours - but try and find out if the spring rate is much higher than standard as it will limit your flex.
I think my Kings springs were about $225 the set so I think it would work out to a little bit over $300 for my 3 1/4" lift, but I didn't get shocks with it.
Posted: Mon Sep 15, 2003 7:32 pm
by Bundytime
U don't need to body lift a Bundera to run 35's!!!!!
As Robbie said a set of aftermarket springs will bolt straight in and the 35's will only rub on the rear inner guard but who cares, u r never(rarley for some) going fast when on full flex.
Don't buy the lift blocks and hopfully this saves u some cash dude!!!!
Set of springs and shockers from Repco or Pedders $400-450
Cheers Daniel
Posted: Mon Sep 15, 2003 10:01 pm
by Monty
body lifts are cheap mine only cost me 50 bucks all up
just take out the bolts and buy new ones that are 2 inches longer and u can get blocks made up from clark rubber or somewhere else cheap as (Danstoyowagon did this all for me) only takes a little bit of time to install as well body lifts are value for money
Posted: Mon Sep 15, 2003 10:32 pm
by bundytunna
if u are interested in getting a body lift
dont get steel or alloy
they make that much farkin noise
get a bit of urethane etc and just turn it up on a lathe
i did one for a mate and it cost me less than 40 bucks
25 for the bolts and he had a stick of urethane lying round and we just turned it on the lathe
altho it took bout 2 weekends to install
lotta booze involved tho
Posted: Tue Sep 16, 2003 2:39 pm
by bundyboy
yeh but body lifts are so much cheaper than shocks and springs, if i just get the body lift will i be able to fit 33's? Will it rub??