Page 1 of 1
Steel supplies - Blacktown or North Sydney
Posted: Fri May 05, 2006 1:55 pm
by beretta
Hi I'm reasonably new to Sydney, can anyone point me in the direction of a good place to get tube for a rear bar and flat gal panel (for 1/4 chop), somewhere close to either Blacktown or North Sydney areas would be good. Name and phone number would be great if you have it otherwise just a name and I'll search for the rest!
Thanks for the help people!
Cheers, Paul
Posted: Fri May 05, 2006 1:58 pm
by v840
Hi Paul, Edcon Steel (9905 5477) in brookvale are pretty good. Can cut it to size for you as well.
Posted: Fri May 05, 2006 2:25 pm
by Surfection
v840 wrote:Hi Paul, Edcon Steel (9905 5477) in brookvale are pretty good. Can cut it to size for you as well.
There is also an Edcon in Blacktown area. Just have a google and you'll find their main site with all the info.
Posted: Fri May 05, 2006 2:50 pm
by beretta
Cool, actually I found edcon on google just now, wicked, thanks for the help gents!
Posted: Fri May 05, 2006 6:12 pm
by sxy759
also buttsworth engineering walker street in windsor 0245776866 very good and pretty cheap will cut as well.
Posted: Fri May 05, 2006 6:26 pm
by Tiny
yeah edcon are pretty good at blacktown, also there is a mob on bessemer st in blacktown, cant remeber the name thare are ok, both will cut as required
Posted: Fri May 05, 2006 10:23 pm
by stevelb1
Go to Sims Metal Recyclers at St Marys, they have a seperate warehouse on site that sells new metal stock and they are the cheapest in sydney. I work in the metal industry as a self employed fitter/welder and thats where I get my material from.
Posted: Fri May 05, 2006 10:49 pm
by Wooders
Metalland silvewater - open Sat mornings too
Posted: Sat May 06, 2006 5:37 pm
by ozy1
SOuthern Steel, they have a couple of branches, i know of Milperra and Penrith, they are open Sat mornings, they cut to length, and stock alot of steel,
Posted: Sun May 07, 2006 12:35 pm
by Gribble
Tiny wrote: also there is a mob on bessemer st in blacktown
E-Z metal.
Posted: Sun May 07, 2006 8:28 pm
by -Richo-
Gribble wrote:Tiny wrote: also there is a mob on bessemer st in blacktown
E-Z metal.
its EZi Metal
on the corner of bessemer and chicago.
Posted: Sun May 07, 2006 8:43 pm
by pongo
stevelb1 wrote:Go to Sims Metal Recyclers at St Marys, they have a seperate warehouse on site that sells new metal stock and they are the cheapest in sydney. I work in the metal industry as a self employed fitter/welder and thats where I get my material from.
Is this the sort of place where you can buy offcuts. We have a place in wagga that you walk around collecting your bits and piececs and then pay SFA . perfect for plate steel etc.
Cheers
Posted: Sun May 07, 2006 8:59 pm
by ozy1
pongo wrote:stevelb1 wrote:Go to Sims Metal Recyclers at St Marys, they have a seperate warehouse on site that sells new metal stock and they are the cheapest in sydney. I work in the metal industry as a self employed fitter/welder and thats where I get my material from.
Is this the sort of place where you can buy offcuts. We have a place in wagga that you walk around collecting your bits and piececs and then pay SFA . perfect for plate steel etc.
Cheers
i went in chasing off cuts and they sent me to the new steel warehouse, they sell full lengths/sheets, and the is a possibility they will cut it for you, i get my tube there when im buyin full lenghts but i prefer to use Southern steel at penrith,