Page 1 of 1
NP205/8 what year etc
Posted: Mon May 08, 2006 10:07 am
by Tiny
looking now at 351 with auto and NP205 for the buggy, need to know what year they came out in, are they steel or alloy transfer?
can get a 302 on a C4 does anyone kow of an adaptor from this box to an NP205?
cheers
adam
Posted: Mon May 08, 2006 10:22 am
by Guy
NP205 is ductile cast iron
Posted: Mon May 08, 2006 10:56 am
by Tiny
love_mud wrote:NP205 is ductile cast iron
thanks
Posted: Mon May 08, 2006 1:43 pm
by CRUSHU
My model F Truck (79) has a bigblock with C6 and NP205 left drop.
Bronco's etc (81 onward) are usually NP208's.
79 small blocks still run a C6 as far as I know.
Posted: Mon May 08, 2006 2:19 pm
by Tiny
CRUSHU wrote:My model F Truck (79) has a bigblock with C6 and NP205 left drop.
Bronco's etc (81 onward) are usually NP208's.
79 small blocks still run a C6 as far as I know.
cheers, talked to westcoast f100, the guys up here were useless, asked for np205 etc and all I got was tak years, I dont know numbers, anyway westcoast in Vic are helping me out and will prolly put a c6 and np205 on a 302 I can get cheap and flip the diff on the GQ, will be low pinion, but will cut an rotate rignt up and end up with the tie rod out of the way, that or swap the knuckles and put it up front.
Still need to know more about twin sticking the np205 though
Posted: Mon May 08, 2006 6:12 pm
by CRUSHU
Tiny wrote:
Still need to know more about twin sticking the np205 though
There was an article in 4 wheeler or petersons 4wd a couple of years ago. if you go to their websites, i think it is in their archives. If not, i do have it here somewhere.
Posted: Mon May 08, 2006 6:19 pm
by spazbot
http://ivanribic.clubfte.com/page2.html
thats got a copy of the required article
Posted: Mon May 08, 2006 6:23 pm
by Tiny
cheers
Posted: Mon May 08, 2006 6:29 pm
by CRUSHU
nice
