Page 1 of 1
35" tyres on a GU
Posted: Mon May 08, 2006 11:01 am
by 4by
Hi all,
Does anybody know if 35 x 12.5 x 15 tyres fitted to a GU wagon with lanscruiser rims stick out past the guards edge.
Thanks is advance.
Re: 35" tyres on a GU
Posted: Mon May 08, 2006 11:27 am
by morkz
4by wrote:Hi all,
Does anybody know if 35 x 12.5 x 15 tyres fitted to a GU wagon with lanscruiser rims stick out past the guards edge.
Thanks is advance.
they should fit the brake calipers arent the larger ones on the diesel but someone that i work with says they come awfully close.
You may get a rock stuck between the caliper and rim and could do some damage but bolt one on and see how you go.
Posted: Mon May 08, 2006 5:48 pm
by thunder
yes they go outside the guards..
easy too get a extension on them .I used 50mm
Posted: Mon May 08, 2006 7:07 pm
by zookjedi
a bees pecker past the guards .
Posted: Tue May 09, 2006 6:04 pm
by 4by
[quote="zookjedi"]a bees pecker past the guards .[/quote]
A bees pecker I can handle.
Just want to make sure to keep it reasonably legal.
Posted: Tue May 09, 2006 11:20 pm
by GUJohnno
Just the sidewalls of mine stuck out with a 17mm off set. Which I thinks is the same as Toyota's off set.
Posted: Wed May 10, 2006 8:41 pm
by zookjedi
mine are 20mm offset and yes only the side wall realy sticks out (and these are meant to be yota offsetas well) ?
Posted: Fri Sep 15, 2006 1:28 pm
by bogged
GUJohnno wrote:Just the sidewalls of mine stuck out with a 17mm off set. Which I thinks is the same as Toyota's off set.
zookjedi wrote:mine are 20mm offset and yes only the side wall realy sticks out (and these are meant to be yota offsetas well) ?
So, which is the measurement for Yota offset?? which is better for GU's.. only runnin 285/75/16s
Offsets
Posted: Fri Sep 15, 2006 7:10 pm
by ROCKRASH
Bogged, can't help much but can tell you that 16x8 51 series pro comp rockcrawler steels are series three GU offset + 17mm. I run 5 inches of lift in a series three with 285/75. Tyres still belt rear inner guards.
Posted: Fri Sep 15, 2006 10:16 pm
by zookjedi
bogged wrote:GUJohnno wrote:Just the sidewalls of mine stuck out with a 17mm off set. Which I thinks is the same as Toyota's off set.
zookjedi wrote:mine are 20mm offset and yes only the side wall realy sticks out (and these are meant to be yota offsetas well) ?
So, which is the measurement for Yota offset?? which is better for GU's.. only runnin 285/75/16s
i ordered the toyota rims so 20mm offset would be them , and they rub a little less with 35's and 3" lift fully tucked than what my 285/75/16 on stock gu rims do , so i reakon the yota offset all the way , if i was running 33"s on the toy rims i doubt they would touch at all by far .
cheers Jai
Posted: Fri Sep 15, 2006 10:28 pm
by bogged
zookjedi wrote:bogged wrote:GUJohnno wrote:Just the sidewalls of mine stuck out with a 17mm off set. Which I thinks is the same as Toyota's off set.
zookjedi wrote:mine are 20mm offset and yes only the side wall realy sticks out (and these are meant to be yota offsetas well) ?
So, which is the measurement for Yota offset?? which is better for GU's.. only runnin 285/75/16s
i ordered the toyota rims so 20mm offset would be them , and they rub a little less with 35's and 3" lift fully tucked than what my 285/75/16 on stock gu rims do , so i reakon the yota offset all the way , if i was running 33"s on the toy rims i doubt they would touch at all by far .
cheers Jai
so anything from 17mm to 20mm! kewl...