Page 1 of 1

NT and WT doors

Posted: Tue May 09, 2006 5:25 pm
by Stubbs
G'day,

Before I start, I did search but found nothing.
I was just wondering if sierra NT door are any different to WT doors, would there be any problems using NT doors on a WT?

Cheers, Stubbs

Posted: Tue May 09, 2006 5:27 pm
by munecito
Not that I'm aware. You can use them no worries.

I think the only difference is the internal trimming.

Will

Posted: Tue May 09, 2006 5:33 pm
by Podge
There really isn't any differences between N/T to W/T but there is differences in W/T models. The differences are in the door latches. Can't tell you the years where the changes are but just something to be weary of.

Posted: Tue May 09, 2006 5:40 pm
by munecito
Good to know.

Thanks Podge.

Will

Posted: Tue May 09, 2006 5:52 pm
by Stubbs
Thanks for that info.
If anyone else knows the years of these changes that would be very helpful.

Cheers, Stubbs

Posted: Tue May 09, 2006 9:40 pm
by Gwagensteve
Not aware of any differences between WT and NT doors. I have an 83 1.0 tray next to the shed ATM with 92 doors on it. All of our cars have had all sorts of doors on them.

Coiler doors are completely different - A much better design and have an intrusion bar. I still think that these are interchangable, but there might be a latch difference. I have never tried to pull the doors off a coiler and put them on anything else.

If the doors aren't interchangable on a coiler, I wouldn't be surprised, nothing else is :roll: