Page 1 of 1
Broken Grand Vitara 2l Motor
Posted: Tue May 09, 2006 6:45 pm
by horse82
Ive managed to break my motor trying to drive underwater. So far ive bent 2 conrods, but I havent pulled the head off yet to see what else. Any suggestions on were to go from here, eg stick with rebuild, second hand motor, convert to v6. Also any good conections for engine parts would be great.
Posted: Tue May 09, 2006 7:21 pm
by Huggy
if you need parts give me a yell i have a v6 sitting in the shed with 4 holes in the block but you may be able to save something
Posted: Tue May 09, 2006 8:18 pm
by cj
Huggy wrote:if you need parts give me a yell i have a v6 sitting in the shed with 4 holes in the block but you may be able to save something
What happened? What's salvageable? Heads?
Posted: Tue May 09, 2006 9:03 pm
by Huggy
motor decided it wanted to be a 4cyl so it spat number 1 and 2 rods outside the block heads should be ok b/c pistons are stuck in the block and car was still running( vey loud ) when the motor was pulled out i have taken the injection off and sumps off but most gear is there
Posted: Tue May 09, 2006 9:06 pm
by Gwagensteve
I believe that a 2L Grand Vitara motor is a 4 Cylinder.
Posted: Wed May 10, 2006 9:41 am
by mud4b
Gwagensteve wrote:I believe that a 2L Grand Vitara motor is a 4 Cylinder.
that is correct...
i have one stripped down here if you need any parts.. i have the rods if you cant find em.
Posted: Wed May 10, 2006 11:18 pm
by Guy
Gwagensteve wrote:I believe that a 2L Grand Vitara motor is a 4 Cylinder.
As he said it wanted to be a 4cyl wouldnt that make it one of the 2.0 V6's