Page 1 of 1

rodeo 2000 3.2 V6 Q's

Posted: Wed May 10, 2006 3:48 pm
by nico
Gday
My rodeo tend to burn a bit of oil not much but enough to be annoying
Does anyones elses do this??????

2nd
I get a clucking noise when I go around corners.I think I read a fix for this but cant seem to find the post again could someone please piont me in the right direction.....TA


Also I have heard that there are new rules about tyre sizes????
what are they and do they allow you to put on bigger rubber????


Thanks

Nico

Posted: Wed May 10, 2006 8:44 pm
by sudso
2nd
I get a clucking noise when I go around corners.
Your'e not carrying chooks in the back are you? :rofl:
Sorry, I couldn't resist.

The clicking noise might be worn CV joints, your hubs aren't locked in on the bitumen are they?

As far as oil usage goes from what I've heard they tend to burn a bit more than most but apparently it's normal??????

I use about a litre over 10000 kms give or take.

Posted: Sun May 14, 2006 7:23 pm
by fishaholic
Nico,
I have an 02 rodeo V6 and it also burns higher than normal (in my opinion) amounts of oil, im keeping a close eye mine at the moment to work out just how much it is actually using, be interested in what you find out.
At first i thought it was because the dealer put 10w-30 in it, :twisted: ive had changed since to 15w-50 but still no real improvement :?

Andrew

Posted: Sun May 14, 2006 10:09 pm
by lay80n
fishaholic wrote:Nico,
I have an 02 rodeo V6 and it also burns higher than normal (in my opinion) amounts of oil, im keeping a close eye mine at the moment to work out just how much it is actually using, be interested in what you find out.
At first i thought it was because the dealer put 10w-30 in it, :twisted: ive had changed since to 15w-50 but still no real improvement :?

Andrew

When i was working at a holden dealership we used 10w-30 oil in the rodeo's with no increase in oil consupmtion. But yeah, i have noticed that they do tend to burn it a bit.
Layto....

Posted: Mon May 15, 2006 9:06 pm
by fishaholic
Layton,

was there any particular reason for such thin oil when the manual states 20w-50???

Andrew