Page 1 of 1
low to high pinion locker HELP
Posted: Thu May 11, 2006 5:59 am
by DAWSO 4x4
just wanted to know if a 85 hilux centre with a ARB airlocker fit into a high pinion bundera centre any help would be great
Posted: Thu May 11, 2006 6:51 am
by 80UTE
It will go straight in only the inner steel air tubing will need to be reshaped and should be long enough. Going the other way hi-low pinion the steel air tube needs to be replaced. You will need a new compression olive for the steel tube when you make it the rite lenght.
Wally
( PS have done this a few times before )
Posted: Fri May 12, 2006 10:31 pm
by DAWSO 4x4
Didn`t come out right
I want to no if the locker from the hilux will fit the bundera high pinion
Posted: Sat May 13, 2006 2:34 am
by hophoar
Justin, apart from the airlines you might have to changed the hemisphere bearings depending on what locker your using RD01 or RD23. Either way it should be do-able. Also note that ARB have changed how the copper tube fits into the bulkhead fitting, it now uses an O ring instead of compression fitting and the tube size is 1/8 instead of 3/16.
John.