Page 1 of 1
wizard
Posted: Thu May 11, 2006 8:02 am
by rover1
anybody know they are still around, been trying to ring them for the last week and no answer. the number i have been ringing is the one on there website. i just want a price on a bolt-in 5 link, is there anyone else that does a bolt-in..
Posted: Thu May 11, 2006 8:18 am
by HeathGQ
Ring SEQLD 4x4 in Nerang - Sean Calcino
I believe Wizard has stopped dealing with the public....
Posted: Thu May 11, 2006 8:22 am
by rover1
got there number by any chance...found it
rang him, doesn't really want to do it.....reckons his supplier is going over sea's
Posted: Thu May 11, 2006 9:30 am
by GRINCH
try superior enginering i know they make hd replacement arms for the wizzard 5 link, i wouldnt recomend the wizzard 5 link after seeing the wall thinkness of there lower arms, about 2-3 mm. heard of a few snapping in competion.
Posted: Thu May 11, 2006 11:24 am
by rover1
tried them, mick doesn't do them anymore. he reckon's nobody's doing the anymore, best bet is to find a second hand one, or copy one.
i rang ontrack at slacks creek, he didn't want to do one either, will se if he rings me back with price.
Posted: Thu May 11, 2006 5:32 pm
by bru21
cheezy does them.
I went off 5 links as they are vague on road and if they are good on road they are as bad as a 3 link flex wise.
my wizard was so good in the bush as the wheels just never left the ground and every photo shows the car level as the front and back were so well matched. on road it ws ok but i would go for something stronger for obc hence my current setup. there is too much movement in 5 links as the bushes are too close together making the movement at the kingpins double that of a 3 link - hence the deathe wobbles etc
cheers bru
Posted: Thu May 11, 2006 5:45 pm
by ludacris
I think Dale from Dextreme makes them.
LudaCris
Posted: Thu May 11, 2006 9:17 pm
by giantracing
I CAN SUPPLY YOU A NEW 5 LINK FROM BRENT AT WIZZARD, CALL ME AND I GIVE YOU A PRICE. 0438279890