Page 1 of 1
bundera chassis dimensions
Posted: Thu May 11, 2006 2:50 pm
by badger
my engineer wants the chassis dimensions for my bundera
its an 85 rj70 is that helps
same as a lj70
so if anyone has these or knows where to get them id be rather happy
Posted: Thu May 11, 2006 3:11 pm
by bigbrowndog
email sent, cheers
chassis
Posted: Thu May 11, 2006 3:38 pm
by badger
thanks champ
chassis
Posted: Thu May 11, 2006 3:44 pm
by badger
thanks champ
Posted: Thu May 11, 2006 5:34 pm
by Thommo 73
don't have any for a MWB fj73 87' by any chance?
Posted: Thu May 11, 2006 6:13 pm
by O*N*E
i have dimensions for 73 series. will email you when i get it scanned, hopefully tonight.
Hoang
Posted: Thu May 11, 2006 11:57 pm
by wanna
could you email me a copy of the bundra chasis to be good for when i start cutting things
Posted: Fri May 12, 2006 5:14 am
by evanstaniland
could i grab a copy of the bundera dimensions aswell please
evan
Posted: Fri May 12, 2006 6:06 am
by badger
ill try an host them somewhere as soon as i get the chance
Posted: Fri May 12, 2006 6:10 am
by badger
ill try an host them somewhere as soon as i get the chance
Posted: Fri May 12, 2006 9:20 am
by bigbrowndog
Posted: Fri May 12, 2006 4:16 pm
by midi73
Mate I am sorry to be a pain, but would you have a copy of the specs for the 80s chassis like these ones you just posted. If so could you post it as well please.
Posted: Fri May 12, 2006 7:08 pm
by bigbrowndog
Sorry the only other ones I have are 60 & 70 series. cheers
Posted: Fri May 12, 2006 7:32 pm
by midi73
Ok no worries. Actually could you post the 60 one.
Cheers.
Dave.
Posted: Fri May 12, 2006 8:37 pm
by sudso
So what does the engineer actually want the dimensions for?
I'm going to put a 350 chev in my RJ70 so I guess an engineer will be scrutinising my chassis too?
Arms up for the scans
cheers
Posted: Fri May 12, 2006 8:52 pm
by bigbrowndog
midi73 wrote:Ok no worries. Actually could you post the 60 one.
Cheers.
Dave.
Posted: Sat May 13, 2006 7:54 pm
by badger
he wants them to engineer the extra cab chop, 1uz and a few other lil suprises i have in stall for it
Posted: Sat May 13, 2006 8:00 pm
by badger
he wants them to engineer the extra cab chop, 1uz and a few other lil suprises i have in stall for it
Posted: Sun May 14, 2006 12:11 am
by sudso
badger wrote:he wants them to engineer the extra cab chop, 1uz and a few other lil suprises i have in stall for it
So your shortening the body only and putting a small tray on the back? That would look cool, and practical.
What's a 1uz motor?
sudso
Posted: Sun May 14, 2006 12:14 am
by sudso
R the scans for the FJ BJ & HJ back there the same for an RJ70?
Posted: Sun May 14, 2006 8:44 pm
by bigbrowndog
cheers Jakam04, The hj 75 scan.. HJ75RP hj75R =Ridht hand drive, P = pickup.
75RV= Right hand Drive V= hard top , soft top.
Posted: Mon May 15, 2006 8:19 pm
by evanstaniland
which 1 is for the bundera???
blonde moment
chassis diagrams
Posted: Mon May 15, 2006 8:44 pm
by badger
i think it could be usefull if everyone posted up any toyota chassis diagrams they have so that they could be used by everyone on the forums
1uz
Posted: Mon May 15, 2006 8:47 pm
by badger
a 1uz is a 4 litre quadcam v8
and its a yota mota
Posted: Tue May 16, 2006 2:02 am
by bigbrowndog
evanstaniland wrote:which 1 is for the bundera???
blonde moment
PostPosted: Sun May 14, 2006 8:44 pm Reply with quote Edit/Delete this post Back to top
cheers Jakam04, The hj 75 scan.. HJ75RP hj75R =Ridht hand drive, P = pickup.
75RV= Right hand Drive V= hard top , soft top. cheers gazza
Re: chassis diagrams
Posted: Tue May 16, 2006 2:04 am
by bigbrowndog
badger wrote:i think it could be usefull if everyone posted up any toyota chassis diagrams they have so that they could be used by everyone on the forums
Perhaps all the chassie dimensions from everyone could be put in the cruiser bible.
Posted: Tue May 16, 2006 4:37 pm
by BundyMonkey
evanstaniland wrote:which 1 is for the bundera???
blonde moment
One with BO 61 at the top right
